How To Choose A Dust Explosion-proof Motor
Jul 30, 2023
In a factory, there may be some combustible dust or explosive dust in the factory environment. Therefore, motors operating in this environment require special requirements. For example, it is required that the motor be in operation to prevent sparks. And the motor can operate normally in this dust environment. This type of motor that can work in places with explosive and combustible dust is a dust explosion-proof motor.
Before understanding dustproof and explosion-proof motors, first understand how dust explosion hazardous areas are classified. Dust explosion hazardous areas are divided into two zones based on the frequency and duration of explosive or combustible dust environments.
Zone 10: An area where dust clouds or dust layers that may appear or mix with air during normal processing, processing, or cleaning can reach explosive concentrations.
Zone 11: An area not classified as Zone 10, but where dust clouds appear under abnormal conditions and can reach explosive concentrations when mixed with air.
In order to operate normally in the above-mentioned areas, the casing of dust explosion-proof motors can also be divided into two categories based on their ability to limit dust:
Dust tight shell, with a protection level of IP6X and a mark of DT;
Dustproof enclosure, with IP5X protection level and DP marking.
When selecting dust explosion-proof motors, the appropriate type of dust explosion-proof motor can generally be selected based on two aspects.
1. First, select the protection type based on the corresponding motor in different hazardous locations
How to choose a dust explosion-proof motor
2. Choose based on the nature, category, and temperature group of the dust
How to choose a dust explosion-proof motor
Of course, for someone who is not familiar with dust motors, choosing a suitable dust explosion-proof motor is not so easy. It is generally recommended to inform the dust explosion-proof motor manufacturer of the workplace and working environment of one's own motor, so that the manufacturer can choose a suitable method.







